Baby Bottle Warmer Bag USB Powered Heater Insulated Heating Bag Travel Portable in Car Heater Drink Warm Milk Thermostat Bag

Product information:

G.W:106 G

Packing Size:9*7*12.2cm

Product name: Milk bottle insulation cover

Product size: Diameter of 50-80mm*120mm

Rated voltage: 5V

Rated current: 2A

Rated input power: 10W

Suitable feeding bottle diameter: 50mm-80mm

Main materials: PU, polyester fiber, PET, alloy heating film

Component details:

Handle, insulation cover, temperature control button, temperature value display screen, Type-C interface

Operations:

1.Put the bottle into the insulation cover adjust the magic tape according to the size of the bottle, and connect the power supply.

2.After connecting the power supply, the power light is on and the connection is normal. The default temperature is 35 ℃.

3.Long press the + button to start the temperature adjustment, a total of 7 gears can be adjusted (35°C, 40°C, 45°C, 50°C, 55°C, 60°C, 65°C)

4. After selecting the gear, the display will jump to the current temperature and start working.

5. After the preset temperature is reached, the temperature display shows the preset temperature and enters the insulation mode.

Kind tips：

1. When the temperature is lower than the set temperature, and is heated, the value display will change according to the current temperature.

2. When the temperature reaches the set temperature, it stops heating, and enters the heat preservation state, and the display shows the set heat preservation temperature.

3.When the temperature is higher than the set temperature, the display shows the real-time monitoring temperature.

4.It is recommended to use this product in the environment of 0℃~40℃. Lower the environment temperature is, longer the heating-up time will be.

5.The heating function at low temperature is limited by the power and cannot be achieved at present.

6.Heating of 200ml of water from 25℃ to 45℃ takes about 20 to 30 minutes.

7.The heating time is long, it is recommended to heat in advance and keep it warm.

8.The minimum diameter of the bottle shall not be less than 50mm, and the maximum diameter shall not be greater than 80mm.